797 Performance, LLC
Fuel Injection Depot Hemi PWM Fuel System – Returnless Kit for 5.7, 6.1 & 6.4 Charger & Challenger
Fuel Injection Depot Hemi PWM Fuel System – Returnless Kit for 5.7, 6.1 & 6.4 Charger & Challenger
SKU:sku-48837736497344
Couldn't load pickup availability
Fuel Injection Depot Hemi PWM Fuel System
The Fuel Injection Depot Hemi PWM fuel system is a plug-and-play returnless pump kit for big-power 5.7L, 6.1L and 6.4L Chargers and Challengers. A standalone controller runs the pumps at partial duty at idle and cruise, which cuts fuel heating and pump wear.
Specifications
- Pulse-width-modulation (PWM) pump control, based on MAP sensor signal
- Pumps run at about 20–25% duty cycle at idle and cruise (supplier figure)
- Standalone PWM controller, fuel-pressure sensor and MAP sensor included
- No boost switch needed to bring in the extra pumps
- Complete pre-made plug-and-play harness
- Standard two-pump kit; optional third 285 TI pump and harness
- Supplier rating: more than 1,000 whp on E90 with the two-pump kit
Compatibility
Choose Charger or Challenger and your engine: 5.7/6.1 (older cars), 2012–2019 5.7, 2020–2023 5.7, 2012–2021 6.4 or 2022–2023 6.4.
A Straight Answer on the Details
The option list starts at 2005, but the title says 2006, and the Challenger only arrived for 2008. Both pump options also show the same price. Please confirm with us before ordering.
Why Upgrade to a Returnless Multi-Pump Fuel System
A Hemi that has been supercharged, pulleyed, ported or switched to E85 needs far more fuel than the factory pump can supply. When the pump runs out, fuel pressure drops at high rpm, the engine leans out and the tune has to pull power to stay safe. For background, read about electric fuel pumps.
A multi-pump hat adds flow inside the tank while keeping the factory returnless layout, so the fuel lines and tank stay where they are. Plug-and-play wiring means no splicing into the factory harness, and the system can grow with your build.
Installation Notes
Work with the battery disconnected, a low fuel level and good ventilation, with no sparks or open flames nearby. Follow the supplied instructions, check every fitting for leaks before refitting the rear seat, and have your tuner check fuel pressure and pump control after fitting.
Related Parts
Often bought together with this part: DeatschWerks DW400 Pump Module, DeatschWerks X2 Fuel Pump Module and DeatschWerks 95lb Hemi Injectors. For more help, read our guide on bad fuel injector symptoms.
Common Questions
What does PWM control do on the Fuel Injection Depot Hemi PWM fuel system? It slows the pumps at idle and cruise and speeds them up under load, which keeps fuel cooler and extends pump life.
Can I add a pump to the Fuel Injection Depot Hemi PWM fuel system later? Yes. All Fuel Injection Depot kits are upgradeable, and a third-pump option is offered.
Ordering Information
Our Shipping Information page covers delivery times, and our Warranty and Returns pages explain what to do if anything isn’t right on arrival. Not sure it fits? Use our Request a Part page and we’ll check before you buy.
Built to order: Fuel Injection Depot products are built to order and usually ship within 5–10 business days. If your order is time-sensitive, please contact us before ordering so we can confirm the current lead time.
You’ll find this part in our Fuel System, Performance Parts and Dodge collections. Choose your options above and order with confidence.
Vehicle Compatibility
Vehicle Compatibility
Compatibility details for this part will be listed here once available. If you're unsure whether this part fits your vehicle, use Request a Part or Contact Us with your year, make, model and engine.
Shipping
Shipping
Shipping options can vary by product, destination, weight, dimensions and warehouse location. See our Shipping Information page for details.
Warranty
Warranty
Warranty terms depend on this specific product. See our Warranty page for general information, or contact us with questions.
Share
