7.3L Powerstroke Turbo Pedestal & EBP Delete Kit – 1999.5-2003 Ford F-250/F-350

A Turbo Pedestal & EBP Delete for the 7.3L Powerstroke

This is a hi-flow turbo pedestal built for the 1999.5-2003 Ford F-250, F-350, F-450, and F-550 with the 7.3L Powerstroke diesel, replacing the factory pedestal along with its Exhaust Back Pressure (EBP) valve control and up-pipes in one kit. If you're chasing the turbo lag and restriction that comes from a stock EBP valve sticking or failing, or you're rebuilding a Powerstroke's turbo section and want to address the up-pipes at the same time, this pedestal is built specifically around that job rather than as a universal fit-anything part. The 7.3L Power Stroke is one of the most widely modified diesel platforms Ford ever built, which is a big part of why turbo-section parts like this one are still in steady demand decades after the engine went out of production.

What the EBP Valve Does, and Why This Pedestal Skips It

The factory EBP valve on the 7.3L Powerstroke works with the turbo pedestal to build exhaust backpressure on demand, mainly to speed cabin warm-up and assist engine braking, using a valve and pedestal design that's a known wear point on trucks with real mileage. This pedestal is a hi-flow design without EBV valve control built in, so the exhaust housing flows more freely through that section without the factory valve's moving parts or the vacuum lines and sensor that operate it. It's a common upgrade path for 7.3L owners doing turbo or up-pipe work who don't want to reinstall a factory EBP system that's already failed once.

Key Features

• Hi-flow performance turbo pedestal, exhaust housing with no EBV valve control
• Cast from high-silicon ductile iron for the turbo Y-adapter section
• 5+5 cast wheel design with a 60mm inducer and 80mm exducer
• Includes replacement up-pipes, a common failure point on these trucks

Specifications

• Design: Hi-flow performance turbo pedestal, exhaust housing without EBV valve
• Material: Cast iron (high-silicon ductile iron Y-adapter)
• Wheel: 5+5 cast wheel
• Inducer / exducer: 60mm / 80mm
• Condition: New aftermarket

Compatibility

Fits 1999.5-2003 Ford F-250, F-350, F-450, and F-550 Super Duty trucks equipped with the 7.3L Powerstroke diesel. This pedestal is specific to the 7.3L's turbo housing and EBP arrangement, so it isn't a match for the 6.0L or 6.4L Powerstroke that followed it, which use a different turbo and exhaust architecture entirely.

Why Up-Pipes Matter Here

The factory up-pipes connecting the exhaust manifolds to the turbo on a 7.3L are notorious for cracking at the bellows section from years of heat cycling, which is exactly the kind of failure that turns into a boost leak and a check engine light for exhaust leak or low boost. Since this pedestal is designed to be installed alongside new up-pipes, replacing both at once means you're not opening the turbo section back up again in a few thousand miles because the old up-pipes gave out shortly after.

Who This Pedestal Is For

This is a part aimed at 7.3L owners already working on the turbo section, whether that's chasing a boost leak, replacing a stuck or failing EBP valve, or doing a broader turbo rebuild where addressing the pedestal and up-pipes together makes more sense than doing it twice. As with any modification to a diesel's exhaust and turbo hardware, it's worth checking your state and local rules on vehicle modifications before installing, since requirements vary by location.

Installation Notes

Pedestal and up-pipe replacement on a 7.3L means getting the turbo off first, and the up-pipe bolts at the exhaust manifold flanges are a common spot for snapped studs on a truck that's never had this section apart before — soaking them in penetrating oil well ahead of time saves real frustration. New gaskets at every flange in this job are cheap compared to redoing the work because one seated poorly, and it's worth inspecting the turbo itself for shaft play while it's out, since a tired pedestal is sometimes a sign the turbo isn't far behind it.

Ordering Information

This 7.3L Powerstroke turbo pedestal is in stock and ships ready to install. Our Shipping Information page covers current timelines, and our Warranty and Returns pages explain what to do if anything isn't right on arrival. Not sure this matches your specific truck's turbo setup? Our Request a Part page is the fastest way to confirm before you order.

Related Parts

This pedestal is listed in our Ford collection, along with our Diesel Parts and Turbochargers & Performance collections, where you'll find other parts for the 7.3L Powerstroke.