2x Front Wheel Bearing Hub Knuckle Assembly For Dodge Caliber 2007-2012, Jeep Compass & Jeep Patriot 2007-2017

Front Wheel Bearing Hub Assemblies for the Caliber, Compass, and Patriot

This is a pair of front wheel bearing hub knuckle assemblies built for the 2007-2012 Dodge Caliber and 2007-2017 Jeep Patriot and Jeep Compass, cross-referenced to OE numbers 698-410/698410 and 698-411/698411 (right and left) along with the corresponding 5085702 and 5085703 series and 68088498/68088499 series part numbers. If your front end is making a grinding or humming noise that changes with vehicle speed, or you're feeling a vibration through the steering wheel, this pair replaces both front hub assemblies as a matched set.

Why the Caliber, Compass, and Patriot Share This Part

The Dodge Caliber, Jeep Compass, and Jeep Patriot were all built on the same Chrysler compact platform during this era, sharing a substantial amount of front suspension and drivetrain hardware underneath their different body styles and badges. That shared platform is exactly why a single wheel bearing hub assembly, cross-referenced to the same OE numbers, covers all three nameplates instead of requiring separate parts for each one.

Key Features

• Cross-referenced to OE numbers 698-410/698-411, 5085702/5085703 series, 68088498/68088499 series
• Complete hub and bearing assembly, sold as a left and right pair
• Direct bolt-on fitment using factory mounting points
• New condition, ready to install

Specifications

• Position: Front, left and right
• Left-side OE numbers: 698-411, 698411, 5085703AF, 5085703AG, 5085703AH, 5085703AI, 5085703AJ, 5085703AK, 68088499AA, 68088499AB, 68088499AC, 68088499AD
• Right-side OE numbers: 698-410, 698410, 5085702AF, 5085702AG, 5085702AH, 5085702AI, 5085702AJ, 5085702AK, 68088498AA, 68088498AB, 68088498AC, 68088498AD
• Package: 2 pieces (1 left, 1 right)
• Condition: New

Compatibility

Fits the 2007-2012 Dodge Caliber and 2007-2017 Jeep Compass and Jeep Patriot. Because trim levels and drivetrain configurations (front-wheel drive versus all-wheel drive) can affect which hub assembly a given vehicle uses, it's worth confirming the OE numbers above against your specific vehicle before ordering, particularly if your Caliber, Compass, or Patriot has had prior front-end work.

Signs Your Wheel Bearing Hub Needs Replacing

A failing front wheel bearing hub typically shows up as a grinding, growling, or humming noise from the front of the vehicle that gets louder as speed increases, a vibration felt through the steering wheel or floor, or a wheel that feels like it has slight play when you rock it top to bottom by hand. Because the wheel bearing is a sealed, continuously loaded component, once it starts to wear, the noise and play tend to get progressively worse rather than improving, which is why most owners replace the hub once a bearing failure is confirmed rather than waiting it out.

Why Replace the Complete Hub Assembly

On these vehicles, the wheel bearing is pressed into a hub unit that also carries the ABS wheel speed sensor tone ring, so replacing the complete hub assembly rather than just the bearing itself avoids the specialized press equipment a standalone bearing swap requires and ensures the ABS sensor reads correctly afterward. A direct-fit replacement hub also means the wheel studs, mounting bolt pattern, and sensor interface all match the factory unit exactly, without the fitment guesswork of mixing components from different suppliers.

Installation Notes

Replacing a front wheel bearing hub assembly means removing the wheel, disconnecting the ABS sensor wiring, removing the brake caliper and rotor to access the hub, and unbolting the hub from the steering knuckle. Because these bolts see a lot of torque and road exposure over the life of the vehicle, penetrating oil ahead of time and a breaker bar are worth having on hand, especially on a vehicle with real mileage. Torquing the new hub and wheel hardware to factory spec once installation is complete is important, since these fasteners are safety-critical.

Ordering Information

This wheel bearing hub assembly pair is in stock and ships ready to install. Our Shipping Information page covers current timelines, and our Warranty and Returns pages explain what to do if anything isn't right on arrival. Not sure this matches your specific vehicle? Our Request a Part page is the fastest way to confirm before you order.

Related Parts

This wheel bearing hub assembly is listed in our Suspension collection, along with our Jeep and Dodge collections, where you'll find other parts for these platforms.