Toyota Camry Steering Knuckle and Hub Assembly, Front Right 2.5L 2012-2017

This Toyota Camry steering knuckle is a loaded front right knuckle with the hub and wheel bearing already fitted, for the 2012-2017 Camry with the 2.5L four-cylinder. You bolt in the whole assembly instead of pressing a new bearing into the old knuckle, which saves time and the need for a hydraulic press.

Specifications

• Part name: steering knuckle and hub assembly
• Position: front right (passenger side on left-hand drive cars)
• Part numbers: 43211AA010, 43502-AA011, 47781-06130, 90080-36193, LK046, 686-248

Application

• Toyota Camry L 2.5L sedan, 2012-2014
• Toyota Camry LE 2.5L sedan, 2012-2017
• Toyota Camry XLE 2.5L sedan, 2012-2017

Does not fit the 3.5L V6, the SE or the Hybrid. For the driver side on the SE and XSE, see our Camry SE/XSE driver side knuckle.

Fitting

Loosen the axle nut with the car on the ground, then support the car, remove the caliper and disc, and separate the ball joint, tie rod end and strut. Torque everything to spec, tighten the axle nut with a torque wrench, and get an alignment afterwards. For more, see the wheel hub assembly article on Wikipedia.

See all wheel bearings and hubs and Toyota parts. Delivery details are on our shipping page.