Front Driver Side Steering Knuckle & Wheel Hub Bearing Assembly For 2012-2017 Toyota Camry SE & XSE 2.5L

A Steering Knuckle and Hub Assembly for the Camry

This is a front driver-side steering knuckle and wheel hub bearing assembly built for the 2012-2017 Toyota Camry SE and SE Sport, and 2015-2017 Camry SE and XSE, all with the 2.5L engine, cross-referenced to OE numbers 698383 and 43212-06240. If you're hearing a grinding or humming noise from the front-left corner of the car, or feeling play in that wheel, this assembly replaces the complete knuckle, hub, and bearing as one loaded unit.

Why a Loaded Knuckle Simplifies This Repair

A steering knuckle is the structural piece that the wheel hub, bearing, and suspension components all bolt to, and on this Camry, the knuckle, hub, and bearing come as one pre-assembled "loaded" unit rather than three separate parts you'd have to press together yourself. That matters because pressing a wheel bearing into a bare knuckle requires a hydraulic press and precise alignment, so buying the complete loaded assembly means that step is already done correctly before the part reaches you.

Key Features

• Cross-referenced to OE numbers KA698383, 698383, 43212-06240, 43246-73010
• Complete loaded assembly: knuckle, hub, bearing, dust shield, and wheel studs included
• 26-spline hub matching factory design
• Front driver (left) side, direct-fit replacement

Specifications

• Position: Front left (driver side)
• Spline count: 26
• Material: Steel
• Includes: Hub, bearing, dust shield, wheel studs
• Ball joint: Not included
• Condition: New

Compatibility

Fits the 2012-2017 Toyota Camry SE and SE Sport, and 2015-2017 Camry SE and XSE, all with the 2.5L engine. Because Camry trims from this generation used more than one front suspension setup depending on engine size, it's worth confirming your specific Camry has the 2.5L engine and SE or XSE trim before ordering, since a V6 or a different trim may use a different knuckle assembly.

Signs This Part Needs Replacing

A failing steering knuckle and hub assembly on a Camry typically shows up as a grinding or humming noise from the front-left corner that gets louder with speed, a vibration felt through the steering wheel, or noticeable play when you rock the top and bottom of the tire by hand. Because the knuckle also anchors the suspension and steering components at that corner, a knuckle that's cracked or bent from an impact can also cause uneven tire wear or a car that pulls slightly to one side, not just bearing noise.

Why Replace the Complete Assembly

Buying the knuckle pre-loaded with the hub and bearing already installed means the whole corner assembly is replaced as a matched, correctly pressed unit, which avoids the risk of a bearing being pressed slightly off-center during a DIY press job. It also means the ABS sensor tone ring built into the hub is a factory-correct match, so the ABS and traction control systems continue to read wheel speed accurately after installation.

Installation Notes

Replacing this assembly means removing the wheel, disconnecting the ABS sensor and brake caliper, disconnecting the tie rod end and lower ball joint from the knuckle, and separating the strut from the knuckle before the old unit comes free. Because professional installation is recommended for this job, particularly the ball joint separation, having the right tools on hand or having a shop handle it is worth considering if you're not set up for suspension work. A wheel alignment afterward is a good idea as well, since separating the strut and steering components can shift alignment slightly even with a direct-fit replacement.

Ordering Information

This steering knuckle and hub assembly is in stock and ships ready to install. Our Shipping Information page covers current timelines, and our Warranty and Returns pages explain what to do if anything isn't right on arrival. Not sure this matches your specific Camry trim? Our Request a Part page is the fastest way to confirm before you order.

Related Parts

This steering knuckle assembly is listed in our Suspension collection, along with our Toyota collection, where you'll find other parts for the Camry.