Drilled and Slotted Rotors: Are They Worth It for Your Car or Truck?
Share
Quick answer: Drilled and slotted rotors are brake discs with holes drilled through the braking surface and shallow slots cut across it. The holes help shed heat, and the slots help clear water, dust and the gases that build up between pad and rotor under hard braking. Brembo's aftermarket team describes drilled holes as even better at getting rid of heat than grooves, and slots as the best design for clearing water and gas (Professional Motor Mechanic, quoting Brembo). The trade-offs are faster pad wear and, under very hard use, a risk of cracks starting at the drilled holes (SlashGear). For trucks and SUVs that tow, haul or carry heavy loads, a matched kit of drilled and slotted rotors with ceramic pads is a sensible upgrade when the old rotors are due for replacement anyway. For a light car used only for short commutes, plain rotors do the job.
That's the short version. The rest of this guide explains how drilled and slotted rotors actually work, where they help and where they don't, how to tell when your rotors need replacing, and how to choose and fit a kit for your vehicle. We sell complete brake kits and brake parts for popular trucks and SUVs, including the Ford F-150, Chevy Silverado, Ram 1500, Jeep Wrangler, Honda CR-V and Toyota Land Cruiser, and we ship auto parts worldwide.
What Are Drilled and Slotted Rotors?
Every disc brake works the same way. The caliper squeezes the brake pads against a spinning iron disc, the rotor, and friction turns the vehicle's movement into heat. The rotor's job is to provide a flat, hard friction surface and to soak up and get rid of that heat.
Most factory rotors are plain, sometimes called blank rotors. They have a smooth, flat face on each side. Many have internal cooling vanes between the two faces, which is what "vented" means.
Drilled and slotted rotors keep that basic design but add two features to the friction faces:
- Drilled holes go right through the friction surface, usually in a pattern of small holes arranged in curved rows.
- Slots, also called grooves, are shallow channels cut across the face of the rotor. They don't go all the way through.
A drilled and slotted rotor combines both. That's what you'll find in most of the brake kits we stock, paired with ceramic pads.
Drilled Rotors on Their Own
Drilled rotors have holes but no slots. The holes add surface area and give heat and gas somewhere to go. Brembo's Marco Moretti told Professional Motor Mechanic that drilled holes are even more efficient at heat dissipation than grooves (PMM). The downside is that each hole is a small weak point. SlashGear points out that with drilled rotors, the rotor can gradually lose structural strength and crack (SlashGear). That risk shows up mainly under repeated, extreme heat cycles, like track use, rather than normal road driving.
Slotted Rotors on Their Own
Slotted rotors have grooves but no holes. Brembo's view is that slotted discs give the best expulsion of water and gas (PMM). Because there are no through-holes, SlashGear notes there's no danger of stress cracks forming at holes. The cost is pad life: the slots give the pad an extra edge to bite against, which means increased pad wear (SlashGear).
Why Combine Them?
Drilled and slotted rotors try to get some of both benefits: holes for heat and slots for cleaning the pad surface and clearing gas and water. SlashGear describes rotors that combine drilling, slotting and venting as especially suited to towing and other demanding jobs with sudden heavy braking, while also noting that they combine the drawbacks of each type (SlashGear). That's an honest summary, and it's the one we'd give a customer too.
How Drilled and Slotted Rotors Work
To understand what the holes and slots do, it helps to know what goes wrong in a brake that's working hard.
Heat
Braking turns motion into heat. A heavy pickup slowing from highway speed, or a loaded SUV coming down a long hill, puts a lot of heat into the rotors. If the rotors and pads get too hot, they stop gripping as well. That's brake fade. PowerStop, a brake parts maker, describes fade as too much heat from friction preventing the brakes from working properly, and notes it's more likely when there's extra weight in or attached to the vehicle (PowerStop).
Drilled holes and internal vents give heat more ways to leave the rotor, and they let air move through the disc. PowerStop says drilled and slotted rotors help cool brake pads by increasing airflow (PowerStop).
Gas
Brake pads contain resins and binders. When pads get very hot, some of that material burns off and forms gas. Brembo explains that the holes and slots let these gases escape more quickly, which helps prevent fade (PMM). Without an escape route, the gas can sit between the pad and the rotor and reduce grip.
Water and Dirt
In heavy rain, on wet roads or on dusty trails, a thin layer of water or grit can form between pad and rotor. Slots act like a squeegee, wiping it away each time the rotor turns. That's why slotted surfaces are popular on off-road vehicles and in wet climates.
A Fresh Pad Surface
Brembo also says grooves and holes keep scraping off old friction material, so fresh pad material is always meeting the disc (PMM). That helps keep the bite consistent, but it's also why slotted rotors wear pads a little faster.
One extra benefit Brembo mentions is practical: the grooves help workshops judge wear, because as the disc wears down, the slots get shallower (PMM).
Drilled and Slotted Rotors vs Plain Rotors
Here's how the three main designs compare, based on the sources above.
| Plain (blank) rotors | Slotted rotors | Drilled and slotted rotors | |
|---|---|---|---|
| Heat dissipation | Good, especially if vented | Good | Better: holes add airflow and surface area |
| Gas and water clearing | Basic | Very good | Very good |
| Pad wear | Lowest | Higher | Higher |
| Crack risk at extreme heat | Lowest | Low, no holes | Higher than plain under very hard use |
| Noise | Quietest | Can be slightly noisier | Can be slightly noisier |
| Look | Plain | Sporty | Most aggressive |
| Best for | Light daily driving | Performance and endurance use | Towing, hauling, heavy SUVs, spirited road driving |
Some of these rows are general trade-offs rather than measured figures. The size of the difference depends on the rotor's quality, the pad compound and how you drive. For normal daily driving, SlashGear says you won't notice much difference between drilled and slotted designs (SlashGear). The benefits show up when the brakes work hard and get hot.
Are Drilled and Slotted Rotors Worth It?
It depends on how you use your vehicle. Here's an honest breakdown.
Yes, If You Tow or Haul
Towing a trailer, a boat or a camper adds a lot of weight that your brakes have to stop. PowerStop says fade is more likely with more weight in or attached to the vehicle, and recommends upgraded rotors and pads as one of the main ways to reduce it (PowerStop). For a half-ton pickup that tows most weekends, or a three-quarter-ton truck that's often loaded, drilled and slotted rotors make sense, especially when the old rotors need replacing anyway.
Yes, for Heavy SUVs and Trucks
Large SUVs like the Tahoe, Suburban, Escalade, Land Cruiser and LX570 are heavy even before you add passengers and luggage. Their brakes work hard every day. Drilled and slotted rotors with ceramic pads are a popular replacement for these vehicles.
Yes, for Hilly or Mountain Driving
Long descents are hard on brakes because they get hot and stay hot. Better heat and gas management helps. But no rotor replaces good driving technique: PowerStop advises not dragging the brakes when going downhill and using a lower gear so the engine and transmission help slow you (PowerStop).
Yes, for Off-Road and Wet Climates
Slots help wipe water, mud and dust off the pad surface. If you drive a Wrangler on trails or live somewhere it rains a lot, that's a real day-to-day benefit.
Maybe, for Spirited Road Driving
If you enjoy winding roads, drilled and slotted rotors can give more consistent braking as things heat up. Pair them with a good pad and fresh brake fluid.
Probably Not Needed, for Light Commuting
If you drive a light car mostly in town, plain rotors are quieter, cheaper on pads and perfectly adequate. Drilled and slotted rotors won't hurt, but you may not notice a difference.
Not Ideal, for Serious Track Use
Repeated track sessions push rotors to extreme temperatures, which is where cracking around drilled holes becomes more of a concern (SlashGear). Dedicated track cars often use slotted-only rotors or purpose-built racing discs.
What a Rotor Upgrade Won't Fix
It's worth being clear about the limits, so you spend your money where it helps most. New rotors improve how the brake handles heat, gas and water. They don't change everything else that affects stopping.
- Tyres decide grip. The brakes can only slow the wheels; the tyres have to stop the vehicle. Worn or low-grip tyres will lengthen stopping distances no matter what rotors you fit.
- Calipers and hoses matter. A seized caliper, a sticking slide pin or a swollen flexible hose will cause pulling, uneven wear and overheating on one side.
- Fluid affects pedal feel. Old fluid can boil under heavy use and make the pedal soft, which is covered further down.
- Suspension affects stability. Worn shocks, struts and bushings let the vehicle dive and squirm under braking. Our guide to shock absorbers vs struts explains how these parts work.
- Weight is still weight. An overloaded truck or a trailer beyond your towing limit will overwork any brake system.
Think of new rotors and pads as one part of a healthy brake system. When the whole system is in good shape, an upgrade like this gives you the most benefit.
Signs Your Rotors Need Replacing
Most people start looking at drilled and slotted rotors because their current brakes are worn. Here are the signs it's time.
Pulsing or Vibrating Brake Pedal
A pedal that pulses, or a steering wheel that shakes when you brake, usually points to uneven rotor thickness. Tire Review notes that it only takes about 0.001 inches of thickness variation to cause a noticeable vibration in the pedal (Tire Review). People often call this "warped rotors", but the cause is usually uneven thickness or deposits on the rotor surface rather than the rotor bending.
Grinding or Scraping Noise
Grinding often means the pads are worn down to the backing plate and metal is rubbing on metal. That damages the rotors quickly. If you hear it, stop driving as soon as it's safe and check your brakes.
Deep Grooves or a Lip on the Edge
Look at the rotor face through the wheel spokes. Deep scoring, or a raised lip around the outer edge, shows the rotor has worn a lot.
Blue Spots or Cracks
Blue or dark patches are a sign of overheating. Cracks are a reason to replace the rotor straight away.
Below Minimum Thickness
Every rotor has a minimum thickness, the thinnest it can safely be. Tire Review describes it as the minimum thickness that gives safe braking, and notes it's usually marked on the rotor casting (Tire Review). Measure the rotor with a micrometer. If it's at or below the minimum, it must be replaced.
Excessive Runout
Runout is side-to-side wobble as the rotor turns. Tire Review gives a guide of less than 0.002 inches of wobble as acceptable (Tire Review). Always check your vehicle's service specification, because figures vary.
Rust and Hard Spots
Heavy rust on the friction surface, or hard spots that show up as shiny, uneven patches, often can't be machined away. Tire Review notes that resurfacing usually won't fix hard spots, so the rotor needs replacing (Tire Review).
For more on reading these warning signs, our guide to bad wheel bearing symptoms covers noises that are easy to confuse with brake problems, and our bad control arm symptoms guide explains clunks and vibration from the suspension.
Resurface or Replace?
Rotors can sometimes be resurfaced, or "skimmed", on a brake lathe to make them flat again. Tire Review says a rotor that has plenty of metal left, and no hard spots, cracks, severe grooving, rust or pulsation complaints, can be resurfaced (Tire Review). If machining would take it below minimum thickness, it needs replacing.
In practice, many drivers now replace rather than resurface, for a few reasons:
- Modern rotors are often thinner and lighter, leaving less metal to machine.
- A resurfaced rotor is thinner, so it holds less heat and may wear out sooner.
- Labour for machining can add up, and a new rotor is often not much more.
- A complete kit gives you new rotors and matching pads at the same time.
If your rotors are due for replacement, that's the ideal moment to consider drilled and slotted rotors, because you're paying for new rotors either way.
Why Replace Rotors and Pads Together
New pads on old, worn rotors don't make full contact, which can cause noise, vibration and a soft pedal until they wear in. New rotors with old pads have the same problem the other way round. Fitting both together gives you two fresh, flat surfaces that bed in evenly.
That's why our brake kits include both. For example, our Lexus LX570 and Toyota Land Cruiser brake kit includes two 14-inch drilled and slotted front rotors, two rear rotors, four front and four rear ceramic pads, plus spring clips, according to the supplier listing. That covers both axles in one order.
Always replace rotors and pads in axle pairs, both front or both rear, so the vehicle brakes evenly from side to side.
Drilled and Slotted Rotor Kits by Vehicle
Here are the brake kits we currently stock. Most use drilled and slotted rotors, and the kits pair rotors with ceramic pads. Rotor sizes and fitment come from the supplier listings, so check the product page for full details before you order.
Ford F-150 (2012–2020)
Our F-150 front and rear brake kit has 13.8-inch front and 13.7-inch rear drilled and slotted rotors with ceramic pads for both axles. It fits 2012–2014 six-lug models and 2015–2020 models with a manual parking brake (MPB). It's a strong choice for F-150s that tow or carry heavy loads.
Chevy Silverado 1500, GMC Sierra 1500, Tahoe, Suburban, Yukon and Escalade ESV
The front and rear kit for 2014–2018 Silverado and Sierra 1500 and 2015–2020 Suburban, Tahoe, Yukon XL and Escalade ESV covers GM's full-size truck and SUV platform.
Chevy Silverado and GMC Sierra 2500 and 3500 HD
For heavy-duty GM trucks, the 2011–2019 Silverado and Sierra 2500/3500 HD front kit uses 14-inch drilled and slotted front rotors. These trucks often tow heavy trailers, which is exactly the job this rotor design suits.
Older Silverado 2500 and Avalanche 2500
The front and rear kit for 2002–2006 Avalanche 2500 (8-stud) and 2002–2004 Silverado 2500 with manual transmission keeps older work trucks stopping well. Note the specific fitment in the title.
Dodge Ram 1500, Durango and Chrysler Aspen
The Ram 1500 front and rear brake kit fits 2006–2018 Ram 1500 and 2007–2009 Durango and Aspen, with 13.2-inch front and 13.9-inch rear rotors.
Jeep Wrangler (2007–2017)
The Wrangler front and rear brake kit has 11.9-inch front and 12.4-inch rear drilled and slotted rotors. The slots help on wet and muddy trails, and it's a good refresh for a JK that's had bigger tyres fitted.
Toyota Land Cruiser and Lexus LX570 (2016–2021)
The Land Cruiser and LX570 kit uses 14-inch front rotors and covers both axles.
Honda CR-V AWD (2012–2016)
The CR-V AWD front and rear kit has 12-inch vented front rotors and 12-inch solid rear rotors with ceramic pads. Its listing doesn't describe the rotors as drilled and slotted, so look at the product photos to confirm the design; we include it here for CR-V owners who want a complete rotor and pad kit for both axles.
Chevy Traverse, Buick Enclave, GMC Acadia and Saturn Outlook
The front brake kit for 2007–2017 Traverse, Enclave, Acadia and Outlook uses 12.8-inch drilled and slotted front rotors. These three-row crossovers are heavy family haulers, so the extra heat management is useful.
BMW 3, 4 and 5 Series, X3 and Z4
For BMW owners, we stock brake discs for the 3, 4 and 5 Series, X3 and Z4, plus rotor retaining screws for when the old ones are seized or stripped. Check the listing for the exact chassis codes and rotor design.
Don't see your vehicle? Browse all our brake parts or send us your make, model, year and VIN through our request a part page. You can also browse by make in our Ford, Chevrolet, GMC, Dodge, Jeep, Toyota, Honda and BMW collections.
How to Choose the Right Drilled and Slotted Rotors
Fitment is the single most important thing to get right. Brakes vary a lot even within one model and year.
Check Fitment Details Carefully
- Year, make and model. Start here, but don't stop here.
- Drivetrain. 2WD and 4WD or AWD versions can use different brakes. The CR-V kit above is for AWD models.
- Lug or stud count. Light-duty and heavy-duty versions of the same truck often differ. The Avalanche kit is for 8-stud models.
- Parking brake type. Some trucks have a manual or an electric parking brake, and the rear rotors differ. The F-150 kit is for manual parking brake models.
- Brake packages. Performance packages, such as Brembo-equipped versions, use different calipers and rotors.
- Rotor diameter. Measure your current rotor or check the stamping. Our listings show rotor size in the title.
If you're not sure, contact us before you order. Ordering the right part first time saves you a return and a weekend.
Left and Right Rotors
Drilled and slotted rotors are usually directional. The slots and vanes are designed to turn one way, so there's a left and a right rotor. Fit them on the correct sides. Most are marked, and your kit's instructions will show which way the slots should face.
Coating
Many aftermarket rotors have a zinc or similar coating on the hub and edges to resist rust. The supplier listing for our F-150 kit, for example, mentions a galvanised surface treatment for corrosion resistance. Coatings help keep rotors looking good in wet and salty climates, though the friction surface itself will always develop a thin film of surface rust if left standing, which clears on the first few stops.
Choosing Pads for Drilled and Slotted Rotors
The pad compound matters as much as the rotor. Our kits come with ceramic pads, which suit most road vehicles.
- Ceramic pads tend to produce less dust and less noise, and last well. They're a good match for daily drivers, SUVs and light trucks. PowerStop also notes that carbon-fibre ceramic pads stand up well to heat (PowerStop).
- Semi-metallic pads are often used for heavy-duty work and high heat, though they can be noisier and dustier.
For a full comparison, read our guide to ceramic vs semi-metallic brake pads. If you only need pads, we also stock ceramic pads for the Chevrolet Equinox and GMC Terrain, ceramic pads for the Nissan Pathfinder, Murano and Infiniti QX60, ceramic pads for Ford and Lincoln models, D1222 semi-metallic pads for the Toyota Camry and rear brake pad wear sensors for Audi models.
Don't Forget Brake Fluid
Upgrading rotors won't help much if the brake fluid is old. Brake fluid absorbs moisture over time, and PowerStop explains that water-laden fluid has a much lower boiling point; when it boils, it forms bubbles that compress under braking (PowerStop). PowerStop also notes that fluid boil is often mistaken for brake fade (PowerStop). If your pedal goes soft after hard braking, the fluid may be the problem rather than the pads or rotors. Follow your vehicle maker's fluid type and change interval.
Fitting Drilled and Slotted Rotors: What the Job Involves
Replacing rotors and pads is a common DIY job, but brakes are safety-critical. If you're not confident, have a qualified mechanic fit them. Here's an overview of the process so you know what's involved. Always follow your vehicle's service manual for torque figures and specific steps.
- Prepare. Park on level ground, chock the wheels and loosen the lug nuts. Lift the vehicle and support it on axle stands, never just a jack.
- Remove the wheel and look at the caliper, pads and rotor before you take anything apart.
- Remove the caliper and hang it from the suspension with a wire or hook. Don't let it hang by the brake hose.
- Remove the caliper bracket and the old rotor. Rusted rotors may need some persuasion. On some vehicles, such as many BMWs, there's a small retaining screw that holds the rotor to the hub.
- Clean the hub face thoroughly. Rust or dirt on the hub can push the new rotor out of true and cause runout.
- Clean the new rotor with brake cleaner to remove any protective oil from the friction surfaces.
- Fit the new rotor on the correct side, checking the direction of the slots and vanes.
- Refit the bracket, then fit the new pads with any clips and shims supplied. Clean and lightly lubricate the slide pins with a brake-specific grease. Keep grease off the pad and rotor faces.
- Push the caliper piston back to make room for the thicker new pads, then refit the caliper and torque all bolts to specification.
- Refit the wheel and torque the lug nuts in a star pattern.
- Pump the brake pedal several times before moving the vehicle, until it feels firm.
- Bed in the new pads and rotors as described below.
Need tools for the job? Our automotive tools collection is a good place to start, and our maintenance parts cover the other items you'll want while the wheels are off.
How to Bed In Drilled and Slotted Rotors
Bedding in, also called burnishing, is the step most people skip, and it makes a real difference. Tire Rack explains that bedding in transfers a thin, even layer of pad material onto the rotor, and that an uneven layer can cause brake judder, a vibration felt through the steering and suspension (Tire Rack). It also warns that heating the brakes too quickly can lead to uneven deposits.
Each pad maker has its own procedure, and you should follow the one that comes with your pads. As an example of what these procedures look like, Tire Rack lists Hawk's method as six to ten stops from about 35 mph with moderate pressure, followed by two or three harder stops from about 40 to 45 mph, without coming to a complete stop, then letting the brakes cool fully (Tire Rack). Other makers use different numbers of stops and speeds, and some recommend simply driving gently for the first few hundred miles.
A few general rules apply whatever procedure you use:
- Find a safe, quiet road with no traffic behind you.
- Don't come to a complete stop and hold the brakes on while they're hot. That can leave a pad imprint on the rotor.
- Let the brakes cool by driving for a while with little or no braking afterwards.
- Avoid very hard braking for the first few hundred miles. Tire Rack notes most pad compounds need up to 300 to 400 miles to fully develop an even film (Tire Rack).
Are Drilled and Slotted Rotors Noisy?
They can make a little more noise than plain rotors. You might hear a faint whirring or swishing sound as the slots pass the pads, especially at low speed. That's normal and usually fades as the pads bed in. Squealing or grinding is not normal. Check that the pads are seated correctly, the shims and clips are in place, the slide pins are lubricated and nothing is rubbing.
Common Mistakes With Drilled and Slotted Rotors
- Buying by looks alone. Drilled and slotted rotors look great, but fitment and quality matter more than appearance.
- Swapping left and right. Directional rotors fitted on the wrong side work less well.
- Reusing old pads. Worn pads on new rotors won't bed in properly.
- Not cleaning the hub. Rust on the hub face is a common cause of runout and vibration.
- Skipping the bed-in. It can lead to judder that people blame on the rotors.
- Ignoring the fluid. Old fluid can boil under heavy use and cause a soft pedal.
- Forgetting the calipers. A sticking caliper wears rotors and pads unevenly and can overheat them. If one wheel is much hotter or dustier than the other, check the caliper.
- Expecting miracles. Rotors can't fix worn suspension, poor tyres or overloading.
Looking After Your New Brakes
- Check pad thickness and rotor condition at every tyre rotation or service.
- Look for even wear across both sides of each axle.
- Rinse off road salt and mud, especially after winter or off-road trips.
- Replace brake fluid at the interval your vehicle maker recommends.
- On long descents, use a lower gear rather than holding the brakes on (PowerStop).
- Listen for changes in noise and feel, and act early.
Buying Checklist for Drilled and Slotted Rotors
- Confirm your rotors need replacing: thickness, runout, cracks, grooves or pulsation.
- Check your vehicle's exact fitment: year, model, drivetrain, lug count, parking brake type and brake package.
- Decide whether drilled and slotted rotors suit how you drive: towing, hauling, hills, wet weather and off-road use favour them.
- Choose a complete kit with matching pads for the axle, or both axles.
- Plan to replace or flush the brake fluid if it's due.
- Check the caliper slide pins and hardware.
- Book a mechanic, or set aside time and tools to do it yourself.
- Bed in the new pads and rotors after fitting.
Frequently Asked Questions
What are drilled and slotted rotors for?
They're designed to manage heat, gas and water better than plain rotors. The holes help shed heat, and the slots help clear water and the gas that forms when pads get hot (PMM, quoting Brembo).
Do drilled and slotted rotors stop better?
In everyday driving you may not notice much difference. The benefit shows up when brakes get hot, such as when towing, carrying heavy loads, driving in the mountains or braking hard repeatedly, where better heat and gas management can help reduce fade.
Do drilled and slotted rotors wear out pads faster?
Yes, slightly. The slots give the pad an extra edge to bite against, which increases pad wear (SlashGear).
Do drilled rotors crack?
They can under very hard use, because each hole is a potential starting point for a crack (SlashGear). That's mostly a concern on the track or under extreme, repeated heat. Check your rotors at every service and replace any that show cracks.
Are drilled and slotted rotors good for towing?
Yes. SlashGear describes combined drilled, slotted and vented rotors as well suited to towing and other demanding jobs (SlashGear), and PowerStop lists upgraded rotors and pads as a main way to reduce fade when towing (PowerStop).
Can I fit drilled and slotted rotors on just the front?
Yes. The front brakes do most of the work, so many drivers upgrade the front first. Always replace rotors in pairs on the same axle.
Can drilled and slotted rotors be resurfaced?
Often yes, if there's enough thickness left above the minimum and no cracks or hard spots (Tire Review). Many shops prefer to replace them, because machining makes them thinner.
How long do drilled and slotted rotors last?
There's no single answer. It depends on the rotor, the pads, the vehicle's weight and how you drive. Measure thickness at each service and replace them before they reach minimum thickness.
Do I need new pads with new rotors?
Yes, we recommend it. New pads and new rotors bed in together evenly. All our kits include both.
Do you ship brake kits worldwide?
Yes. We ship auto parts worldwide. See our shipping page for delivery details and use the order tracking page once your order is on its way.
The Bottom Line on Drilled and Slotted Rotors
Drilled and slotted rotors aren't magic, but they do have a real purpose. They help brakes cope with heat, gas and water, which matters most on heavy vehicles, when towing or hauling, on long descents and in wet or muddy conditions. In return, they wear pads a little faster and can be a bit noisier, and drilled holes can crack under extreme track use. For a light commuter car, plain rotors are fine. For a pickup, a big SUV or a Jeep that works hard, a complete kit of drilled and slotted rotors with ceramic pads is a worthwhile choice when the old rotors are due.
Browse our brake parts to find a kit for your vehicle. Not sure what fits? Contact us with your vehicle details, or use our request a part page. Every order is backed by our warranty and returns policy, and common questions are answered on our FAQ page. If you're towing with your truck, our guide on leveling kits vs lift kits and our towing accessories are worth a look too, and if your engine is running hot on long climbs, read our guide to car overheating causes.
Sources and References
- Professional Motor Mechanic: Grooves or holes? (with Brembo) (heat dissipation, gas and water expulsion, pad surface cleaning)
- SlashGear: Drilled vs Slotted Rotors (cracking risk, pad wear, towing use)
- Tire Review: Brake Rotors, When to Resurface and When to Replace (minimum thickness, runout, thickness variation)
- Tire Rack: How to Bed In New Brake Pads and Rotors (bedding-in procedures)
- PowerStop: Towing Safety, Brake Fade and Brake Fluid Boil (brake fade, fluid boil, downhill technique)
Written by the EasyLife Team at Easy Life Auto Parts. We sell replacement auto parts and ship them worldwide. Product details in this article come from the supplier listings on our product pages.