EasyLife Auto Parts
GM Camshaft Roller – Silverado, Sierra, Tahoe, Yukon & Escalade (OEM 12629698)
GM Camshaft Roller – Silverado, Sierra, Tahoe, Yukon & Escalade (OEM 12629698)
SKU:CJQT298733402BY
Low stock
Couldn't load pickup availability
A Camshaft Roller for GM's Full-Size Trucks and SUVs
This is a replacement camshaft roller cross-referenced to GM OE number 12629698, covering a wide range of Chevrolet, GMC, Cadillac, and Pontiac vehicles built on GM's full-size truck and SUV platforms through the late 2000s and early 2010s. If you're chasing a valvetrain tick, a lifter-related code, or you're doing a broader engine refresh and want to address the camshaft rollers while everything's apart, this is a direct OE-number match rather than a generic aftermarket substitute.
Where This Part Lives in the Engine
The camshaft roller rides against the camshaft lobe and translates its rotation into the lifting motion that opens and closes each valve, which means it's a part that's under constant load and friction every time the engine runs. GM's Vortec-era small-block V8 family powered this entire range of trucks and SUVs through these model years, and the rollers are one of the components that occasionally shows wear or failure well before the rest of the valvetrain, particularly on engines that have gone long stretches between oil changes.
Key Features
- Cross-referenced to GM OE part number 12629698
- Covers a broad range of GM full-size truck, SUV, and sedan applications
- Direct OE-spec replacement, not a universal aftermarket part
- Addresses a common valvetrain wear point on higher-mileage GM V8s
Specifications
- OE part number: 12629698
- Component: Camshaft roller
- Condition: New
Compatibility
Fits the 2009-2013 Cadillac Escalade, 2007-2008 Chevrolet Avalanche, 2007-2013 Chevrolet Silverado 1500, 2007-2009 Chevrolet Silverado 2500 HD and 3500 HD, 2007-2008 Chevrolet Suburban 1500, 2008-2013 Chevrolet Tahoe, 2007-2013 GMC Sierra 1500, 2007-2009 GMC Sierra 2500 HD and 3500 HD, 2008-2013 GMC Yukon, 2007-2018 GMC Yukon XL 1500, and 2008-2009 Pontiac G8. Given how many model years and trims this OE number spans, it's worth confirming your specific engine against the part number on your old roller before ordering, especially on trucks that may have had an engine swap at some point in their history.
Signs a Camshaft Roller Needs Attention
A failing camshaft roller often shows up as a ticking or tapping noise from the top of the engine that doesn't go away as the engine warms up, sometimes accompanied by a lifter-related trouble code or a noticeable loss of power if a cylinder's valve timing is affected. Because these trucks and SUVs are commonly used for towing and hauling, valvetrain components on high-mileage examples tend to see more cumulative wear than the same engine in a lighter-duty application.
Why Owners Replace This Part
Most owners aren't chasing extra performance with a camshaft roller replacement — they're addressing a noise, a code, or doing a preventive fix while the engine is already apart for other valvetrain work. Because this part is cross-referenced directly to the OE number rather than sold as a generic substitute, it's a straightforward way to put the correct component back in without guessing at compatibility. That matters more than usual on an OE number spanning this many model years and brands, where a mismatched aftermarket substitute can end up close enough to fit but not quite right for long-term durability.
Installation Notes
Camshaft roller replacement on these engines typically means removing the intake manifold and valve covers to access the valvetrain, so budget time accordingly rather than treating it as a quick bolt-on job. It's worth inspecting the camshaft lobes themselves for scoring while everything is open, since a worn roller and a worn lobe often go hand in hand, and replacing only one while leaving the other damaged is a common reason this repair gets revisited sooner than it should.
Ordering Information
This camshaft roller is in stock and ships ready to install. Our Shipping Information page covers current timelines, and our Warranty and Returns pages explain what to do if anything isn't right on arrival. If you're not certain this matches your specific engine, our Request a Part page is the fastest way to confirm before you order.
Related Parts
This camshaft roller is listed in our Engine Parts collection, along with our Chevrolet and GMC collections, where you'll find other parts for these full-size trucks and SUVs.
Vehicle Compatibility
Vehicle Compatibility
Compatibility details for this part will be listed here once available. If you're unsure whether this part fits your vehicle, use Request a Part or Contact Us with your year, make, model and engine.
Shipping
Shipping
Shipping options can vary by product, destination, weight, dimensions and warehouse location. See our Shipping Information page for details.
Warranty
Warranty
Warranty terms depend on this specific product. See our Warranty page for general information, or contact us with questions.
Share
